The universal roofing covering is the professional flooring having broad application is considered. It is used for roofing roofs, wall coverings, building fences and gates. This material is also suitable for the construction of small shops, gas stations, private buildings and cottages with a small number of floors.

Benefits This material consists of:

• cost-effectiveness (there are no trims in the work, since they prepare sheets of individual sizes. When assembling, a small number of joints are obtained);
• ease of installation;
• universality;
• long service life (at least 50 years);
• environmental friendliness;
• not subject to burning;
• possessing a wide range of choice of shapes and colors to meet the needs for every taste;
• resistance to adverse effects of precipitation;
• aesthetic functions;
• inexpensive price.

Content

• 1 What gate can be collected from a professional flooring?
• 2 What is considered in the manufacture of sliding gates?
• 3 What is needed for the device of swinging gates?
• 4 The process of making swing gates
• 5 Installation of swing gates
• 6 Cost of installation and manufacturing

What gate can be collected from a professional flooring?

Successfully selected like ворот зависит общий вид строения в целом и удобство при использовании. Главной функцией ворот является оградительная, защищающая от недоброжелателей и декоративная, способная придать дому эстетический вид. Gate from a professional flooring бывают several typesdiffering in the way of opening. It:

• swing;
• recoiling;
• sliding;
• garage;
• rotary lifting.

Each type of gate has its own by appointment and design features. The most popular type is hinged, with a fairly simple and clear design and ease of installation. The only disadvantage of this type of gate is the presence of large space with a huge number of advantages: they are reliable, convenient in operation, you can install on them automatic drive. As a rule, they have one or two flaps attached to the supporting intake fitting with special construction loops. The electric drive built into the swing gates is convenient for trips in which the opening and closing of the gate does not require an exit from the car. The low weight of the sheet makes it possible to use a low-power drive, which also saves money. Automatic equipment is selected in such a way that it does not cause failures in the cold to -30 degrees.

In order to saving spaces are ideal for protecting a wide entrance with sliding gates, requiring a long and narrow space for sliding when opening and closing. This design has gained popularity with the owners of private homes. It is similar to sliding interior doors. The advantage of this design is the ease of moving aside due to non-contact with the ground, which does not require snow removal in winter. Design recoil ворот требует присутствия automatics и различных приводов для использования. Эти ворота представлены цельной панелью с роликовым основанием с осуществлением движения вдоль забора. Ширина подобных ворот проектируется от 3 до 4 метров с учетом проезда легкового и грузового автомобиля.

What is considered in the manufacture of sliding gates?

In the fence and sliding gates there should be no horizontal and vertical slopes for trouble-free opening and closing. Special attention should be paid to the selection of high-quality commercials. To acquire them follows from the calculation of the weight of the gate. The design should try to perform as easily as possible, which does not damage the reliability and will allow the smooth operation. automatics (videos will last much longer). Install the door leaf with a wide opening (so as not to have to redo it when buying a new car of other dimensions).

The combination of sliding and sliding structures are garage doors. They often open from the bottom up, which significantly saves the internal space and contributes to preserving the integrity of the vehicle. This type of gate requires remote control, loops and supports. When installing, calculations of resistance and moments of bending are required, which are carried out by a qualified engineer. This gate requires insulation.

Gate from a professional flooring can be made by own strength. Before starting work, determine the choice of profile sheet. Exist 3 types profile sheets. These are sheets of grade C, HC and H. The most suitable for the device of the gate is the wall profile of group C, for the manufacture of which a sheet of galvanized sheet is used, which has a small thickness and a small height of the rib. It is fairly light and durable in quality, classic in performance.

What is needed for a device swing gates?

1. The presence of sheet profiled.
2. 4 shed.
3. Screws.
4. Fragment Korpich and stones.
5. Cement and sand for mortar.
6. Pipes from metal.
7. Tool "Bulgarian".
8. Apparatus for welding structures.
9. Accessories for painting.

The process of making swing gates

1. The marking of the future gate is done.
2. Dig two pits, the depth of which should be not less than 1 m and width up to 50cm
3. Metal pipes with the necessary cross-section for the supports are selected.
4. Preparing a solution.
5. Supports are installed in excavated pits. Well strengthened and poured concrete solution. For concrete setting time is maintained at least one and a half days.
6. The door frame is assembled using a small pipe diameter, and the structure is welded.
7. Three-millimeter triangles are mounted in the corners of the carrier frame to ensure the strength of the structure. From reinforcing scraps and pipes, knots are made for constipation by welding them onto the supporting frame from above and below.
8. Hinged hinges are welded to the doors on the outside of the gate. The second half of the loops is welded to concrete supports.
9. By means of self-tapping screws the professional flooring is attached on the bearing frame of gate.
10. Painting the pillars for an attractive look and to avoid corrosion.

Installation of swing gates

Gate more often it is mounted separately from swing gates, but there are design diagrams for wicket structures in one of the wings. It is made as wide as 80 cm, and no more than 180 meters high. For its device instead of a cross lintel on the door leaf, a longitudinal is made parallel to the long side. To form the perimeter of the wicket in the upper part, the longitudinal bridge is connected to the long side bridge with a distance of about 180 cm from the bottom of the leaf. Gateways loops mounted on the lower and upper hinge leaves.

Secrets installation of swing gates:

1. It is necessary to make sure that the opening angle of the gate is level.
2. It is more convenient to open the gate from the building (such use contributes to a longer service life and for security purposes - more effort will be required for breaking into from the street side).
3. The way of opening the gate from the house to the street side corresponds to the fire safety technique.

The device of gate from a profile leaf does not demand special qualificationsbut should be well prepared for the work. Prepare materials, think about your desires well and transfer them to paper, indicating the appearance of the gate, the chosen form and design. When working, you should make accurate measurements and not perform (at first glance, simple and understandable things) by eye, so as not to redo your work again.

The cost of installation and manufacturing

In each region manufacturing ворот из профнастила имеет разные цены. В Москве средняя цена на manufacturing и установку ворот составляет не менее 45 тысяч рублей, в Калуге такие ворота стоят на 10 тысяч дешевле, В Санкт-Петербурге ворота из профнастила обойдутся чуть больше 35 тысяч. Чтобы узнать the cost gate, should contact the city's construction firms.

Today for the manufacture of fences and gates presented a huge amount of construction of materials, что вызывает у индивидуальных застройщиков растерянность при выборе. Как показала практика строительства, лучшим вариантом является профильный лист. Устройство ворот из профильного листа занимает одно из первых мест в сравнении с другими likeми ворот. Этому способствуют высокие эксплуатационные свойства профнастила. Они выглядят беднее кованых или украшенных резьбой деревянных ворот, зато превосходят их по availabilityquality and aesthetic appearance.